zone melting
英 [zəʊn ˈmeltɪŋ]
美 [zoʊn ˈmeltɪŋ]
n. 区域熔炼；区域精炼法
双语例句
- Experimental and Numerical Modeling Investigation on Purification Process of Phosphorus by Zone Melting
区域熔融法提纯工业黄磷的数学模型与实验研究 - Microstructure of Al_2O_3/ YAG/ ZrO_2 Hypoeutectic Ceramics Directionally Solidified with Laser Zone Melting
激光区熔定向凝固Al2O3/YAG/ZrO2亚共晶陶瓷的微观组织 - Mould Temperature Distribution in Manufacturing Single-crystal Copper by Zone Melting Heated Mould Continuous Casting Criterion Conditions for Formation of a Single and Double Recirculation Flow Pattern in a Slab Continuous Casting Mold With Argon Blowing
区熔连铸法制备单晶铜的铸型温度场分布吹氩板坯连铸结晶器内单双循环流的判别条件 - An ingot of Nb based in-situ composites ( NBISC) was produced by a vacuum self-consuming arc melting furnace. The directionally solidified samples were prepared by an electron beam floating zone melting ( EBFZM) furnace with a high temperature gradient, and their microstructural characteristics were analyzed.
铌基共晶自生复合材料（NBISC）经真空自耗电弧熔炼成母合金锭，采用高温度梯度的电子束区熔装置制备定向凝固的试样，分析其组织特征。 - Zone melting recrystallization for polycrystalline silicon thin film solar cells
区熔再结晶制备多晶硅薄膜太阳电池 - Mathematical analysis for point-doping in zone melting
区域熔化点掺杂的数学分析 - Methods The raw material was purified by high vacuum melting, zone melting at Cl 2 atmosphere and preform crystal growth in quartz ampoule at high vacuum.
方法光纤原料采用高真空熔炼、氯气气氛下区域融熔和高真空石英安瓿内单晶生长等特殊工艺提纯，光纤用热挤压法成型。 - Using Y-Shaped crystals as seeds, niobium bicrystals with a planar grain boundary of a misorientation 7 °、 9 ° and 12 ° and low dislocation density were grown by the floating zone melting technique.
用Y型籽晶悬浮区熔法制取位向差为7°、9°、12°的双晶，其晶界平直、位错密度低，适合于进行晶界性能的研究。 - Behavior of carbon and oxygen in floating-zone melting of pure iron
碳、氧在纯铁浮区熔化过程中的行为 - Research on the Technology of Molybdenum Crystals of Refractory Metals Prepared by Electron Beam Floating Zone Melting
难熔金属钼晶体的电子束悬浮区熔定向凝固工艺研究 - A new method of zone melting for refining super-purity gallium
一个新的提炼超纯金属镓的区域熔化法 - The ZMR ( Zone Melting Recrystallization) technique was next introduced to improve the smoothness and crystal quality of SSP and to further improve the quality of the thin film.
为了改善硅带衬底的质量，引入区熔再结晶的方法，期望将其表面平整度及结晶质量进一步提高，进而改善以其为衬底的多晶硅薄膜质量。 - By means of zone melting recrystallization ( ZMR) method, polycrystalline silicon thin films with large grains and relative high carrier mobility were obtained, which could act as a seeding layer.
提出了一种简化的区熔再结晶方法，利用这种方法在非硅衬底获得了晶粒尺寸达到毫米级、致密的籽晶层。 - Preparing principle and preparation technology of Mo and Mo-Nb alloy single crystal and structure and component of electron beam floating zone melting are introduced.
介绍了钼和钼-铌单晶的制备原理、制备工艺及电子束区域熔炼炉组成结构。 - The main technical characteristics of TDG-80 zone melting single-crystal furnace are introduced.
介绍TDG-28型大直径区熔单晶炉的特点和主要技术指标及性能。 - The mathematical analysis for point-doping in zone melting has been given in detail.
本文对区域熔化点掺杂过程进行了详细的数学分析。 - Principle of zone melting to improve the purity of high purity indium was investigated.
从理论上探讨了采用区域熔炼法进一步提高铟的纯度的原理。 - Therefore, in this paper, two directional solidification methods, Czochralski method and electron-beam floating zone melting method, were used to obtain such material.
本文采用切克拉斯基法（CZ法）和电子束区熔法（EBFZM）两种定向凝固方法制备该共晶自生复合材料； - If the length of melted zone is thought invariable for a given kind of alloy, the temperature gradient increases with the rising of the EB power and zone melting rate.
在不考虑熔区长度不变的条件下，固液界面前沿的温度梯度随抽拉速率的增加而增加。 - Preparation of Niobium Single Crystals With Floating Zone Melting Technique and a Discussion on Its Mechanism
悬浮区熔法制取铌单晶及其机理探讨 - A series of general formulae of impurity concentration distribution along the ingot after point-doping zone melting has been derived.
得到了点掺杂区熔后杂质沿锭长分布的一系列普遍公式。 - On account of the solidification character of rare earth alloys, the zone melting is improved by putting the alloys prepared by arc-melting into the quartz tube, then melting.
鉴于稀土化合物凝固结晶的特点，对区熔法进行了改进，将电弧炉熔炼好的样品装入石英管中，封石英管后在区熔设备上进行区熔。 - ZMR ( zone melting recrystallization) apparatus is introduced, and the processing characteristic of ZMR is studied.
研究了区熔再结晶（ZMR）设备及其工艺特点。 - Second, the polycrystal Mo with the orientation of ( 110) made with high purity sintered and arc-melting Mo was prepared by the method of electron beam floating zone melting without a seed.
采用无籽晶法电子束悬浮区熔定向凝固技术，利用粉末烧结冶金级钼和电弧熔炼高纯钼，经多次区熔获得了取向为（110）的定向凝固多晶钼。 - High purity silicon crystals with ultra high resistivity have been grown by vacuum floating zone melting for fabrication of different types of high resistivity silicon nuclear radiation detectors.
真空区熔特高阻硅单晶是一种纯度很高的硅材料，它是制造配置于测量仪器中的各种高阻硅探测器的基础材料。 - Crystal growth by metal strip heated zone melting and Its Applications
金属片加热区熔法单晶生长及应用 - Samples with uniformly oriented microstructure were produced in a high temperature gradient directional solidification apparatus named Electron Beam Floating Zone Melting ( EBFZM) furnace.
利用电子束区域熔炼高温度梯度定向凝固装置制备了定向效果较好的Nb-Si基自生复合材料试棒。 - Among these four meth-ods, the efficiency of zone melting method is highest, by which bulk LaB_6 single crystal with high purity and quality can be fabricated.
在4种主要的制备方法中，区域熔化法生产效率高，适于制备大尺寸LaB6单晶阴极，且制备的LaB6单晶体纯度高、质量高。 - < 110> oriented rods of a Tb-Dy-Fe magnetostrictive alloy have been successfully prepared by zone melting unidirectional solidification.
采用区熔定向凝固的方法，制备〈110〉取向Tb-Dy-Fe超磁致伸缩合金晶体。